540 Drivall Wire Reel
Spinning Jenny Pattern. This fully collapsible reel is ready
in seconds to make sure you avoid those rook's nest of wire,
when there's an emergency repair to make. This model has a drive
in spike, cambrake, to reduce over-run, and an adjustable setting
for all standard coil sizes. Takes up very little space in the
vehicle. Order Code: 080622
|
|
|
|
 
Gripple Tensioning Tool - Order Code: 09FA500
Accepts wire diameters from 1.00 - 7.00mm
Wirelink
Widely used on all types of fencing to join wire, including high
tensile. Takes both 3.15mm and 2.50mm wire. The jaws inside the
Wirelink grip the wire and hold it under tension. Restraining
is a simple matter. Order Code: 09FA10
Wire Vice
For holding wire under tension on end posts. Widely used on all
types of fencing including high tensile. Takes both 3.15mm and
2.50mm wire. For use when straining the wire through a hole in
a strainer post. Order Code: 09FA09
|
|
Gripple® Tensioning System
The Gripple is a small but extremely powerful device that
creates a join as strong as the wire itself. To join two wires,
they are simply pushed through either end of the Gripple. In
this direction they travel freely, but the moment any tension
is applied gear toothed rollers lock tight. However, the wire
can still be tensioned in the original direction. The Grippler
tensioning tool completes the system. Its powerful lever action
pushes against the Gripple and pulls the wire through applying
a maximum pull load of 300kg. This is the ideal system for repair,
retensioning and maintenance of wire fencing.
Medium Gripple (Packs of 20) - Order Code: 09FA01
Mild Steel: 2.00 - 3.25 mm Working Load 350kg.
High Tensile: 2.00 - 2.85mm Barbed Wire: 2.00 x 1.70mm
Large Gripple (Packs of 20) - Order Code: 09FA02
Working Load 150kg. Mild Steel: 2.70 - 4.30 mm
Barbed Wire: 2.00 x 2.50mm
back to Steel Fencing
index
on to Wire Strainers
and Clipping Guns
Visit the Fencing section in our
Online Store for full range details
|
