|
How to order
When ordering please state metre run required. If not a straight
run or runs, specify other details such as corners etc.
To calculate components required, use the formula below:
Divide Length of run by 1.283 - this will give the number
of axles
Round figure up or down to give the No. of complete axles
Axles x 4 = No. of Vanes (pairs)
Vanes x 2 = No. of Belled Washers
Axles + 1 = No. of Standard Brackets and Top Pivots
Bolt threads may be welded or deformed after erection to prevent
removal.
Double and treble stacked barrier and double width available
to order.
|
|
| PARTS LIST |
| 492251 |
Expanded steel vanes
in interlocking pairs, four pairs required per spindle |
| 492253 |
Spindles, length 1.32m |
| 492254 |
Spindles, washer welded
at one end, length 1.32m |
| 492257 |
Top pivot |
| 492256 |
Standard brackets |
| 492259 |
Coping stone brackets |
| 492252 |
Belled washers, two
for each set of vanes |
| 4922510 |
Pipe Guard Fitting |
back to Perimeter Security index
on to Raptor Anti-Vandal Scaling Barriers
|
