|
MINI MIG TORCHES
|
Mini MIG units have their torches
wired directly into the body of the machine and are often called
"In-Line" or "T-piece". The torch for each
mini MIG machine we offer can be replaced and a variety of spare
parts are offered. |
| STOCK CODE |
PRODUCT |
| 60TWN742400 |
2MTorch For MIG 100/130 |
| 60TWN742401 |
2MTorch For MIG 150/161 |
| 60TWN742402 |
2MTorch For MAX 132/152 |
| 60TWN722039 |
2M Torch For MIG 180 |
|
|
MINI CONTACT TIPS
|
Mini copper contact tips for use
with our Mini MIG welding machines. Priced and shipped in packs
of 10. Versions to fit the MIG and MAX machine ranges are available
for use with several wire diameters. |
| STOCK CODE |
PRODUCT |
| 60TWN722552 |
1.0mm MAX 132-182 |
| 60TWN722566 |
0.8mm MAX 132-182 |
| 60TWN722661W |
0.6mm MIG 100-130 |
| 60TWN722667W |
0.8mm MIG 100-130 |
|
|
MINI CONICAL SHROUDS
|
The popular conical style nozzle
concentrates the shielding gas flow and direction in order to
surround the weld in an inert environment. 2 models of mini shroud
are available, to suit the MIG and MAX units respectively. |
| STOCK CODE |
PRODUCT |
| 60TWN722054W |
For MIG 100/130 |
| 60TWN722149 |
For MAX 132 |
|
|
MINI TORCH LINERS
|
The torch liners in mini MIG machines
are of a simple design and carry wire from the feeder to the
contact tip. Two diameters are available, both in 3m lengths,
to suit the MIG and MAX models respectively. |
| STOCK CODE |
PRODUCT |
| 60TWN742412 |
0.6-0.8mm 3M MIG |
| 60TWN722077 |
0.8-1.0mm 3M MAX |
| 60TWNLINER |
0.6-0.8mm / mtr |
|
|
MINI-TO-EURO CONVERTER
|
Mini MIG torches are often manufacturer-specific
and wired through into the body of the machine. This can make
replacing the torch and spares more difficult than it would be
if a Euro type torch was used. This product converts mini MIGs
to use Euro torches. |
| STOCK CODE |
PRODUCT |
| 60TWN723051 |
Euro Adaptor |
|
|
EURO MIG TORCHES
|
Made to popular "Euro"
design with plug, support springs and ergonomic handles these
torches are made in the EU and are available to suit a range
of machine current sizes, in 3m and 4m lengths. |
| STOCK CODE |
PRODUCT |
| 60QH180300W |
180Amp 3M Euro Torch |
| 60QH180400W |
180Amp 4M Euro Torch |
| 60QH250300W |
250Amp 3M Euro Torch |
| 60QH250400W |
250Amp 4M Euro Torch |
| 60QH290300W |
360Amp 3M Euro Torch |
| 60QH290400W |
360Amp 4M Euro Torch |
| 60QH400400W |
500Amp 4M Euro Torch |
|
|
MINI SWAN NECKS
|
The Swan Neck connects the tip and
shroud to the main torch body and carries the wire, gas and current
to the end of the torch. 4 models available. |
| STOCK CODE |
PRODUCT |
| 60TWN722810 |
For MIG 100/130 |
| 60TWN722078 |
For MIG 132/161/180 |
|
|
|
next page - Euro MIG Accessories
back to Welding index page
|
