Multi-stage 2 gauge regulators
|
Multi-Stage Regulators provide greater
accuracy & pressure control. Gauges show pressure and bottle
contents. 300 bar oxy service and 20 bar acetylene. |
| STOCK CODE |
PRODUCT |
| 60AE7001W |
Oxygen |
| 60AE7002W |
Acetylene |
|
Single-stage 1 gauge regulators
|
Gauge shows pressure bottle contents only. Output pressure
is determined by markings on knob. 300 bar oxygen service, acetylene
20 bar.
|
| STOCK CODE |
PRODUCT |
| 60AE2001W |
Oxygen |
| 60AE2002W |
Acetylene |
|
Single-stage 2 gauge regulators
|
A popular model with gauges that show output pressure and
bottle contents. Oxygen has 300 bar service, acetylene 20 bar.
|
| STOCK CODE |
PRODUCT |
| 60AE3004W |
Oxygen |
| 60AE3002W |
Acetylene |
|
Single-stage plugged regulators
|
No gauges - ideal for site work. Pressure is determined via
the markings around the adjustment knob. Oxygen regulator has
a 300 bar service, the acetylene and propane both have 20 bar
service.
|
| STOCK CODE |
PRODUCT |
| 60AE6001W |
Oxygen |
| 60AE6002W |
Acetylene |
| 60AE6004W |
Propane |
|
Fitted Hose Lengths
|
Fitted oxygen, acetylene and propane hose. With High- Compression
crimp fittings and Check Valves. Available in a range of lengths
& bores, with 3/8" BSP or 1/4" BSP fittings. Replace
x with: B = oxygen (blue), R = acetylene (red), P = propane (orange)
|
| STOCK CODE |
PRODUCT |
| 60BW6000514x |
6mm x 1/4" x 5m |
| 60BW600538x |
6mm x 3/8" x 5m |
| 60BW6001014x |
6mm x 1/4" x 10m |
| 60BW6001038x |
6mm x 3/8" x 10m |
| 60BW800538x |
8mm x 3/8" x 5m |
| 60BW8001038x |
8mm x 3/8" x 10m |
| 60BW8002038x |
8mm x 3/8" x 20m |
| 60BW1000538x |
10mm x 3/8" x 5m |
| 60BW10001038x |
10mm x 3/8" x 10m |
| 60BW10002038x |
10mm x 3/8" x 20m |
|
Fitted Hose and Bend Protector
|
Similar to our standard fitted hose lengths, but with the
addition of a rubber 'bend protector' to reinforce the hose at
its most vulnerable points. B = oxygen (blue), R = acetylene
(red), P = propane (orange)
|
| STOCK CODE |
PRODUCT |
| 60BY213002BP |
6mm x 3/8" x 5m B |
| 60BY213003BP |
6mm x 3/8" x 5m R |
| 60BY213004BP |
6mm x 3/8" x 5m P |
| 60BY213007BP |
6mm x 3/8" x 10m B |
| 60BY213008BP |
6mm x 3/8" x 10m R |
| 60BY213020BP |
8mm x 3/8" x 10m B |
| 60BY213021BP |
8mm x 3/8" x 10m R |
| 60BY213022BP |
8mm x 3/8" x 10m P |
| 60BY213025BP |
8mm x 3/8" x 20m B |
| 60BY213026BP |
8mm x 3/8" x 20m R |
| 60BY213027BP |
8mm x 3/8" x 20m P |
| 60BY213030BP |
10mm x 3/8"x 5m B |
| 60BY213031BP |
10mm x 3/8" x 5m R |
| 60BY213035BP |
10mm x 3/8" x 10m B |
| 60BY213036BP |
10mm x 3/8"' x 10m R |
| 60BY213040BP |
10mm x 3/8" x 20m B |
| 60BY213041BP |
10mm x 3/8" x 20m R |
| 60BY213042BP |
10mm x 3/8" x 20m P |
|
Shank, Mixer and Cutting Attachments
|
A Shank carries oxygen & fuel gas and controls gas flow
to the nozzle. A Mixer combines these gases and holds the welding
nozzle. Available in 2 types; 'Lightweight' (1/4" fittings)
which is more portable and 'Heavy Duty' (3/8" fittings).
The Cutting Attachment fits to an oxy/fuel shank and is available
in Heavy Duty and Lightweight versions. The HD models is used
with ANM, PNM, ASNM and AGNM nozzles and the LW with AFN and
ASFN. Both have an oxy control knob & cutting oxy lever.
Fuel gas flow is controlled by the shank.
|
| STOCK CODE |
PRODUCT |
| 60BB5001 |
HD Shank |
| 60BB5003 |
HD Mixer |
| 60BB6001 |
LW Shank |
| 60BB6003 |
LW Mixer |
| 60BB5002 |
HD Cutting Attachment |
| 60BB6002 |
LW Cutting Attachment |
|
OXY/FUEL Gas Economiser
|
When you need to repeatedly start and stop welding or cutting,
lighting & extinguishing the flame can be performed quickly
and more easily by using a gas economiser.
|
| STOCK CODE |
PRODUCT |
| 60AE2000 |
Oxy/Fuel Economiser |
|
Twin-Outlet Valves
|
Twin-outlet valves let you connect two sets of hoses to a
single gas inlet. With independent adjustement knobs, can control
the flow from each outlet independently.
|
| STOCK CODE |
PRODUCT |
| 60DA8003838YRH |
Oxygen |
| 60DA8003838YLH |
Fuel Gas |
|
| |
|
More OXY/FUEL Accessories
back to Welding index page
|
