Pickling Paste
|
By chemically removing weld oxide,
burn marks, iron ingress and surface rust, the appearance and
service life of stainless steel is greatly improved by these
products. Under the Avesta brand of pickling pastes, 3 products
are available: The 101, the standard, most popular type, with
a thick consistency and good adhesion; the 122, a stronger and
more free- flowing version of the 101; and the 130 Blue, a revolutionary
pickling paste virtually free from toxic, nitric fumes. All are
available in 2.6kg jars. |
| STOCK CODE |
PRODUCT |
| 60EEP264000 |
Avesta 101 - 2.6kg Jar |
| 60EEP264010 |
Avesta 122 - 2.6kg Jar |
| 60EEP264020 |
Avesta 130 - 2.6kg Jar |
|
Argon Flowmeters
|
The flowmeter is designed to be fitted to the outlet of a
regulator to provide greater control of the flow of the shielding
gas used in TIG and MIG welding. Two models are available, the
first rated at 0 to 15 litres per minute (63 cf/h), the second
rated at 0 to 40 litres per minute (84 cf/h). Both have a 3/8"
BSP right-hand threaded female inlet and a 3/8" BSP right-hand
threaded male outlet and can service a maximum inlet pressure
of 2 bar. They should be used with argon or Ar/CO2 mix shielding
gas. These flowmeters are ideal where accuracy and reliability
of flow rate are essential. Both are British Made.
|
| STOCK CODE |
PRODUCT |
| 60AU200B |
Flowmeter - 0-15LPM |
| 60AU300B |
Flowmeter - 0-40LPM |
|
Single-Stage 1 Gauge Regulators
|
This simple regulator is designed to allow basic control of
shielding gas flow and to indicate bottle contents. It has a5/8"
BSP inlet fitting and a 3/8" BSP outlet fitting andshould
be used with either an argon or mixed Ar/CO2 gas cylinder. The
output pressure can be set by following the basic markings on
the knob and the bottle contents are shown via the top-mounted
gauge. This is considered a more economical option, where the
accuracy and reliability of pressure is not essential. A flowmeter
can be attached to govern flow.
|
| STOCK
CODE |
PRODUCT |
| 60AE2005W |
Single-Stage 1 Regulator |
|
Multi-Stage 2 Gauge Regulators
|
These regulators are designed to allow control of shielding
gas flow and provide more accuracy and control over pressure.
They have a 5/8" BSP inlet fitting and a 3/8" BSP outlet
fitting. Models are available to suit argon and helium (which
is often used when welding aluminium). One gauge shows pressure
and the other shows bottle contents. These regulators are British
Made and will service a 300 Bar cylinder. Both the helium regulator
and the argon regulator have a 7 bar maximum output.
|
| STOCK CODE |
PRODUCT |
| 60AE7005W |
Multi-Stage 2-Gauge Argon |
| 60AE7010W |
Multi-Stage 2-Gauge Helium |
|
Clear Braded Hose
|
Clear braided hose is a very popular and versatile hose product.
Often used in water recirculation attached to cooler inlet and
outlet fittings, or as an alternative to using the proper black
argon hose for the short transport of inert shielding gases from
regulator to MIG or TIG machine. Available on a 30m coil, or
by the metre.
|
| STOCK CODE |
PRODUCT |
| 60BY216000 |
Braided Hose 6mm x 30m |
| 60BY216000P |
Braided Hose 6mm Per Mtr |
| 60BY216005 |
Braided Hose 8mm x 30m |
| 60BY216010 |
Braided Hose 10mm x 30m |
|
TIG Adaptor
|
An essential item for use with 'mono' style torches for connecting
power and shielding gas supply. 'DIN' type power and 3/8"
gas fittings
|
| STOCK CODE |
PRODUCT |
| 60RZ1625TA |
16mm - 25mm Type |
| 60RZ3595TA |
35mm - 95mm Type |
|
Small Parts Brush
|
A small, wooden-handled brush with stainless steel bristles
for cleaning dirt and carbon deposits from TIG torch parts, etc.
Although TIG is a comparatively clean process, the build-up of
dirt and deposits can restrict the flow of shielding gas, impair
high frequency and reduce your weld quality.
|
| STOCK CODE |
PRODUCT |
| 60RWWB-15 |
S/Steel Small Parts Brush |
|
| |
|
More Accessories for TIG
Welders
back to Welding index page
|
